Sm mbd-x10sll-f

Дънна платка SUPERMICRO X10SLL-F

1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors
2. Intel® C222 Express PCH
3. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets
4. Dual Gigabit Ethernet LAN ports
(1x Intel® i217LM & 1x Intel® i210AT)
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.0
x8, and 1x PCI-E 2.0 x4 (in x8) slots
7. 2x USB 3.0 (1 Type-A + 1 via header)
6x USB 2.0 (4 rear + 2 via header)
8. Integrated IPMI 2.0 with KVM and
Dedicated LAN
9. SATA DOM power connector support
10. VGA D-sub connector, TPM header

• Product SKUs
MBD-X10SLL-F
X10SLL-F (Bulk Pack)
• Physical Stats
Form Factor
uATX
Dimensions
9.6" x 9.6", (24.4cm x 24.4 cm)
• Processor/Cache
CPU
Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
• System Memory
Memory Capacity
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
8GB, 4GB, 2GB, 1GB
Memory Voltage
1.5V, 1.35V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
• On-Board Devices
Chipset
Intel® C222 Express PCH
SATA
SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
BMC integrated Aspeed AST2400
• Input / Output
Serial ATA
2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports
LAN
2x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB 3.0 ports (1 Type-A, 1 via header)
6x USB 2.0 ports (4 rear, 2 via header)
VGA
1x VGA D-Sub Connector
Serial Port / Header
2x COM ports (1 rear, 1 header)
DOM
SATA DOM (Disk on Module) power connector support
TPM
1x TPM 1.2 20-pin Header
• Chassis ( Optimized for X10SLL-F )
1U Chassis
CSE-113MTQ-330CB
CSE-113MTQ-R400CB
CSE-512F-350B
CSE-512F-441B
CSE-811TQ-441B
CSE-813MTQ-350C
CSE-813MTQ-441CB
CSE-813MTQ-R400CB
Mid-Tower
CSE-731i-300B
CSE-732D4-500B
CSE-732D4-865B
CSE-732D4-903B
CSE-733TQ-500B
CSE-733TQ-665B

• Expansion Slots
PCI-Express
1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 3.0 x8 slot
1x PCI-E 2.0 x4 (in x8) slot
• System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support
• Management
Software
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
• PC Health Monitoring
Voltage
Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header